Water filters by Aquasana
have been voted as Best Buy by Consumers Digest magazine and we know you
enjoyed the pure healthy drinking water Aquasana filters provide. To install your
Aquasana drinking water filter first unscrew existing aerator from your faucet.
Take the supplied faucet diverter valve and make sure the rubber washer is in place inside the chrome swivel collar. Then attach the valve onto the faucet. Next remove the A and B threaded caps by turning in the direction of the arrows. Check to make sure the O-rings and cartridges are installed properly.
Aquasana AQ-4000W
Countertop Water Filter System
After checking the O- rings and cartridges you should then install the inlet hose to the in the connector on cap A by pushing the plastic hose and elbow firmly into the inlet hole. To determine which hose is the inlet hose hold the hose ends so they are pointing into the sink. Turn on the water supply and pull the activator button.
The hose end that water comes out of is the inlet hose and should connect to the inlet fitting on cap A. After connecting the inlet hose connect the outlet hose to cap B in the same fashion. Next stand the filter unit on the countertop to begin the activation process. To flush and activate the filter turn the cold water supply on and pull the round activator button on the diverter valve.
Aquasana AQ-4035
Drinking Water Filter Replacement
Take the supplied faucet diverter valve and make sure the rubber washer is in place inside the chrome swivel collar. Then attach the valve onto the faucet. Next remove the A and B threaded caps by turning in the direction of the arrows. Check to make sure the O-rings and cartridges are installed properly.
Aquasana AQ-4000W
Countertop Water Filter System
After checking the O- rings and cartridges you should then install the inlet hose to the in the connector on cap A by pushing the plastic hose and elbow firmly into the inlet hole. To determine which hose is the inlet hose hold the hose ends so they are pointing into the sink. Turn on the water supply and pull the activator button.
The hose end that water comes out of is the inlet hose and should connect to the inlet fitting on cap A. After connecting the inlet hose connect the outlet hose to cap B in the same fashion. Next stand the filter unit on the countertop to begin the activation process. To flush and activate the filter turn the cold water supply on and pull the round activator button on the diverter valve.
Aquasana AQ-4035
Drinking Water Filter Replacement
, 
, 
, AQ-4050 and 
.- Replaces AQ-4035
in the following systems: AQ-4601
, AQ-4600
, AQ-4000W
, AQ-4000P
, AQ-4000B
, AQ-4601.55
, AQ-4601.62
, and AQ-4601.56
Please note that due to carbon fines and air bubbles the initial flow water will be slightly discolored and cloudy.
Allow the water to flow through the filter in this position until the water runs clear. This will usually take two to three minutes.
When the installation is complete, drink and enjoy pure contaminant free water.
Deluxe Shower Water Filter System with Adjustable Showerhead 